LLDPE / HDPE / LDPE / PP / PVC / POM / ABS Granules

Our product has high density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 °C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.

Categories: ,


HDPE/LDPE granules Specification :

  • Fiber (Carpet, Textiles, Upholstery, etc.)
  • Film (Shopping bags, casting film, multilayer film, etc.)
  • Blow Molding (Medical & Cosmetic container, Lubricant & Paint container, etc)
  • Extrusion Molding (Sheet, Pipe, Wire & Cable, etc.)
  • Injection Molding (Automotive, Electronic, Construction, House wares, Furniture, Toys, etc.

Film grade 

Performance project test data unit
basic properties density 0.9250 g/cm3
MFR 2.8 g/10min
mechanical properties tensile strength 11.0 Mpa
elongation at break 550 %
processing properties adhesive 3.0 n/10cm2
other properties fisheye 20 piece/1200cm2
haze 14.0 %
Injection grade 

item test condition test method value unit
mfr 190°c/2.16 ASTM D-1238 20 g/10min
density ASTM D-792 0.954 g/cm3
tensile strength at yeild ASTM D-638 28 mpa
elongation at break ASTM D-638 250 %
impact tensile strength ASTM D-1822 42 kj/m2
escr ASTM D-1693 3
vactt ASTM D-1525 127 °C